☆This is RTF version, our technician had assembled this quadcopter and have tested it and pre-flied.If you purchase, will be issued together with attractive packaging.
☆LHI FPV Mini Robocat Carbon 270 Quadcopter is fully assembled, tuned and tested by the technician. The drone is easy to fly and maintain and it is very powerful. When you get it, then you can fly. MT2204 2300KV Motor with 6030 carbon fiber propeller give the Robocat 270 quad more powers, push the throttle, you will feel the fast reaction of the drone.
☆LHI FPV Mini Robocat Carbon 270 racing Quadcopter drone comes with high quality MT2204 2300KV brushless Motor (New Version), Simonk 12A ESC, 6030 carbon fiber propeller，Mini Flip32 6DOF Flight Control.Lipo power 11.1V 1500mAh 35C 3S Li-Po
Material(Robocat 270 Quadcopter Frame): Full carbon fiber
Remote Controller: Type: AT9; Channel: 9 channels, 5-9 channels are customizable; Frequency: 2.4GHz ISM band (2400MHz to 2485MHZ) ; Remote Controller Distance: 900m
Flight Controller: Mini Flip32 6DOF Flight Control
Brushless Motor: MT2204 2300KV brushless Motor (CW/CCW)
Brushless ESC: Simonk 12A ESC
Battery: Lipo power 11.1V 1500mAh 35C 3S Li-Po
Charging Voltage: 110 – 240V
Flight Time: 12 – 15min
1 × Robocat 270 Quadcopter Frame(ASIN:B015KDWGMG)
1 × AT9 Remote Controller&AT9 Receiver(ASIN:B010H90Z0I)
1 × Mini Flip32 6DOF Flight Control(ASIN:B018FXL4B2)
1 × Lipo power 11.1V 1500mAh 35C 3S Li-po Battery&Balance Charger（2S-3S)(ASIN:B0185EXK5Y)
4 × MT2204 2300KV brushless Motor(ASIN:B00YA9DCXO)
4 × Simonk 12A ESC(ASIN:B00XBX31WM)
4 × 6045 Plastic Propeller
4 × 6030 carbon fiber propeller (ASIN:B010GYGMD8)
1 × RC Quadcopter ESC Power Distribution Board(ASIN:B00Y42PAN2)
4 × RGB 5050 LED Lights Board 7 Color 12V w / DIP Switch(ASIN:B017X92K9Y)
☆Remote Control Default Unlock：First step: switch open；Step two: open up the ABCD switches；Third step: throttle lever to make the lowest throttle；Fourth step: the throttle lever to lower right corner to keep 5 seconds to complete the unlock,Unlock process CC3D blue light blinks rapidly (reverse this lock)
☆ Robocat 270 Ready-to-Fly Quadcopter: Most of comments and parts have been assembled already; it is ready to fly after you installed the propellers (included) and plug the battery (included).
☆ Full Carbon Fiber frame kit, which is ultralight and great intensity.
☆ Support for HD camera, image transmission and other replacement components, you can DIY to change it as you wish.
☆ Note: We have pre-assembled the Robocat 270 quad and tested it before shipped out.you need to Unlock the Remote Control , we recommended to use 11.5v 35c 1500mah battery.