Based on Simon K firmware, further optimized to the perfect drive performance.
Low-voltage protection, over-heat protection and self-check functions.
Separate power supply for MCU and BEC, enhancing the ESC’s ability of eliminating magnetic interference.
Parameters of the ESC can be set via program card or transmitter.
Throttle range can be set to be compatible with different receivers.
Equipped with built-in linear BEC or switch BEC. Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.
Continuous Current: 12A
Burst current (10S): 15A
Li-xx Battery (cell): 2-3
Dimension (L*W*H): 25mm x 20mm x 7mm
Weight wires Included: 9
BEC Mode: Linear
BEC Output: 1A/5V
MT2204 2300KV Motor
1. Low CG design, ligth weight design, longer flight duration
2. Factory has made dynamic balance test for each motor
3. Integreated processing between prop mount holder and motor cap
4. Adopts Japan NMB bearing, with low noise and longer lifetime
5. Adopts Japan 0.2mm spindle, with high efficiency and low heat
Lipo battery: 2-3S
Max. Thrust: 440g
Prop suggest: 5-6 inch
Suitable for: 250mm wheelbase mini
quadcopter, light weight fixed-wing copter, indoor 3D airplane
1 x 270mm Carbon Fiber 4 Axis Mini Quadcopter
1 x CC3D Flight Controller
4 x MT2204 2300KV Multicopter Motor
4 x Simonk 12A ESC
4 x 6*3 6030 Carbon Fiber Propeller(2pcs CW + 2 PCS CCW)
100% Brand New
Robocat mini frame Carbon Fiber Quadcopter Frame with MT2204 Motors & 12A ESC & 6030 Prop
Main material:Pure carbon fiber
With rubber damper to decrease vibration during flight
Aluminum alloy spacer, light weight, reliable
Note: All the rubber damper and screws, spacer are in random color.